Cable Storage Drums and Cable Reels

General Information

3 Flange Cable Storage Drum- Full WidthCTEC can supply closed frame, triple flange Cable Storage Drums. These are based on a rigid frame design, with fixed leg stand-offs. This design has the added advantage of 'on drum' access to both cable ends, via the split mid-flange design. The drum has a detachable crank style handle to aid both cable dispensing and recoiling. The same handle can also be used to apply the rear flange brake.

This image features our standard width triple flange cable storage drum.




3 Flange Cable Storage Drum- Half WidthThis image* features our half width triple flange cable storage drum (when compared to the drum above). It is designed to multi-stack with the above drums (2 on 1), and is ideal for reduced cable length requirements.

(*Note the cable in the image is for illustration purposes only).














Castor Cable Storage DrumClosed frame, double flange Cable Storage Drums. These are based on a rigid frame design, with locking castors to prevent ‘roll-away’. A benefit of these drums is that the inner connector can be utilised in conjunction with a bulkhead adaptor, fitted to the outward face plate within the hub diameter (subject to connector type). This design also features a drum brake to the rear flange to prevent drum rotation.












Skeletan Cable ReelThe Skeleton range of open frame reels for use with SMPTE 311M Camera Cable or Triax.